Uno sguardo alle caratteristiche tecniche dello Shuttle SK22G2.
Lo Shuttle SK22G2 è basato su architettura AMD con socket AM2 e memorie DDR2. Utilizza un chipset di produzione VIA Technologies K8M890CE e, visto l'obiettivo d'impiego, è dotato di grafica integrata con possibilità di utilizzare soluzioni discrete tramite lo slot PCI-Express 16X.
Riportiamo di seguito le specifiche del modello in esame:
- Chassis
G2-type chassis made of aluminum, black color
storage bays: 1 x 5.25", 2 x 3.5" (1 internal)
dimensions: 30 x 20 x 18.5 cm (LWH)
weight: 3.4 kg net / 4,65 kg gross
Slim-line and pre-installed cabling removes airflow impedance
and makes installation a snap
- Mainboard
Shuttle FX22, Shuttle form factor, proprietary design for SK22G2
Chipset: VIA K8M890CE + VIA VT8237R+
Phoenix/AwardBIOS, 4MBit flash memory
with hardware monitoring and APM 1.2 / ACPI 2.0 power management functions
dimensions: 25.4 x 18.5 cm
- Power supply unit
250 Watt mini PSU, Input voltage: 100~240 VAC
Active PFC: Power-Factor-Correction with active components
connectors: 20-pin ATX, 4-pin ATX12V
EMI Certified: FCC, CE, BSMI, CCC
Safety Certified: UL, TÜV, CB, BSMI, CCC
Power cord: region specific
- Processor support
Socket AM2 (940 pins) supports the following processors:
AMD Athlon 64, AMD Athlon 64 X2 and AMD Sempron
- Processor cooling system
Shuttle I.C.E. (Integrated Cooling Engine)
advanced Heatpipe technology
linear fan control, 92mm cooling fan
- Memory support
2x 240 pin DIMM sockets
supports DDR2-533/667/800 SDRAM memory, Dual Channel
up to a total size of 4GB, max. 2GB per module
- Expansion slots
1x PCI Express 16X graphics slot (PEG)
1x 32 Bit PCI (v2.2)
- Integrated graphics controller
VIA DeltaChrome 128-bit 2D/3D graphics engine
DirectX 9.0 compliant, shared Memory max. 256 MB
- 6-channel Audio
5.1 channel AC97 audio controller
Realtek ACL 655 CODEC
Connectors: line-out (6-ch), line-in, microphone, CD-in
- LAN controller
Fast Ethernet network controller (VIA VT6103)
supports 10 / 100 MBit/s opteration
IEEE 802.3u 100Base-T specifications compliant
- Firewire controller
IEEE1394 Firewire controller VIA 6307
with 2 Firewire connectors (1x front and 1x rear)
supports 400Mb/s, 200Mb/s, 100Mb/s data transfer rate
- Drive connectors
2x Serial-ATA 150, supports RAID 0, 1, JBOD
1x IDE ATA 133 drives
1x floppy disk drive
- Front-panel I/O
Microphone
Headphone (Line-out)
2x USB 2.0
Firewire (4 pol., mini port)
Power and Reset buttons
- Back-panel I/O
VGA connector for monitor (D-Sub)
Firewire (6 pin)
PS/2 for mouse and keyboard
LAN (RJ45)
4x USB 2.0
6-ch Audio line-out (2x rear/front, bass/center)
Line-in
Serial port (COM)
Clear CMOS button
optional Wireless LAN module (PN15g/PN18)
optional parallel port (PC8/PC15)
- Other onboard connectors
2 x USB 2.0 (2x5 pin, total 8x)
1 x AUX audio input
2 x fan connectors (4 pin)
- Accessories
User Manual (multilanguage)
Shuttle I.C.E. Thermal Module (heat-pipe)
Cables for floppy drive, IDE drive and S-ATA drive
Power cord
Driver CDROM (32- and 64-bit driver)
RAID floppy disc
XPC Extras CDROM
Screws and heatsink compound
- Conformity
This device is classed as a technical information
equipment (ITE) in class B and is intended for use in
living room and office. The CE-mark approves the
conformity by the EU-guidelines:
- EMV-guideline 89/336/EWG electromagnetic tolerance
- LVD-guideline 73/23/EWG use of electric devices
within certain voltage-limits